1
2
3
4
5
|
Coop45
|
Subject: My clutch settings for : Coop45 mod#3 | 2009-07-12 12:32:16 |
Posts: 910
Mapleton, Utah , USA
|
Ok guys I went up on my roller weight to 24 grams, but mind you my fixed plate (Mod#2) has a slightly different cut to it as I cut down 20 mm, then bent it in 2.5mm.
I am running the Yellow EPI spring, standard setting on this (no additional twist)
Moveable sheave Mod#3.
Maxxis M980 & M979 Tires, 25's (second set)
High elev. wet clutch springs (thanks to Ruff Cut)
1/4 insulation heat tape on bottom of air box. (For just a touch cooler air temp)
Now we ran 72 miles in the mountains ranging from 6000 ft to 9500 ft.
I never used low range! And we were running through some pretty steep inclines.
Machine will still pull the front tires into a wheelie in high, and my house 4500 ft.
And for the good news! Gas mileage was increased from 22mpg to 26mpg! 
Granted it wasn't as fun as the lighter rollers at 9000 ft, but it seemed to pull harder down in the lower elev. at 6000 to 8000 ft.
So overall this is a very good setting 
Anyway that’s the scoop for now!
Thanks
Coop45
|
----------------
See ya Coop45
No-Toil air filter,Coop Mod4 no shims!(30% lower ratio), no machined secondary and 45mph low range((any more than that it will rub the stock suport cage)) 100 mph high range (cant use the high range ratio, too tall!) brown EPI wet springs (thanks to Ruff Cut) EPI yellow spring, 23.5 gram rollers (total weight) and a few other top secret mods I can"t disclose. hehe!
|
|
SGT_KQ
|
Subject: My clutch settings for : Coop45 mod#3 | 2009-07-12 19:01:53 |
Posts: 1431
Merrill, Wisconsin , USA
 
|
After i send you my sheave i think im going to put my stock rollers back in and run it that way for awhile. Im glad i saw your post on here about you being gone till the 21st because i was just getting ready to tear my clutch apart. I guess i'll have to wait till next week. This thing better run like a monster after this 
|
----------------
2007 Can-Am 800 Outlander Max XT, HMF Penland Exhaust, 27" Zillas on Vision Outback Wheels
2007 Suzuki Kingquad 700 Sold
For Sale KingQuad Black Kimpex Flare Windshield
|
|
TrailBuck650EX
|
Subject: My clutch settings for : Coop45 mod#3 | 2009-07-12 22:08:57 |
Posts: 3080
Perkiomenville, Pennsylvania , USA
|
SGT_KQ,
I just noticed you have a Yoshi Pipe on yours. How does that bad boy run with that on there? 
|
----------------
God Bless!
My Mod Page
2005 John Deere Trail-Buck 650EX
2007 KingQuad 700 Green
Failure will never overtake me if my determination to succeed is strong enough.
The Answers To All Of Your ATV Questions... Right HERE
|
|
MountainKing
|
Subject: My clutch settings for : Coop45 mod#3 | 2009-07-13 06:57:04 |
Posts: 1962
Bear Creek Township, Pennsylvania , USA
|
Coop are you running any shims on your current application?
-MK
|
----------------
2008 King Quad 750 AXI Brushed Black Special Edition
Tobyhanna Army Depot's POW/MIA Memorial, remembering all who served...
|
|
Triple J
|
Subject: My clutch settings for : Coop45 mod#3 | 2009-07-13 06:58:45 |
Posts: 14953
Kasson, Minnesota , USA
|
Coop45
Also when you list the roller weight are you giving the total weight of roller and sleeve or just roller so everyone is on the same track.
|
----------------
My photos -
2010 Metallic Desert Red Prowler XTZ 1000
27" Grim Reaper Tires/Home Made Roof/Quadboss Folding Windshield w/homemade support/LED Tail lights//Venom 4000 lb Winch/Amsteel synthetic line/Home Made Doors/Adjustable Seats/Custom Oh Crap bar/Tonneau Cover/Fat Max storage Boxe in bed
Tiger Tail Towing system
|
|
SGT_KQ
|
Subject: My clutch settings for : Coop45 mod#3 | 2009-07-13 12:40:31 |
Posts: 1431
Merrill, Wisconsin , USA
|
TB I like the Yoshi as it sounds great. I dont know if it added much power but it sounds like it does!
|
----------------
2007 Can-Am 800 Outlander Max XT, HMF Penland Exhaust, 27" Zillas on Vision Outback Wheels
2007 Suzuki Kingquad 700 Sold
For Sale KingQuad Black Kimpex Flare Windshield
|
|
TrailBuck650EX
|
Subject: My clutch settings for : Coop45 mod#3 | 2009-07-13 12:41:59 |
Posts: 3080
Perkiomenville, Pennsylvania , USA
|
Sweet! Is the Yosh Loud?
|
----------------
God Bless!
My Mod Page
2005 John Deere Trail-Buck 650EX
2007 KingQuad 700 Green
Failure will never overtake me if my determination to succeed is strong enough.
The Answers To All Of Your ATV Questions... Right HERE
|
|
SGT_KQ
|
Subject: My clutch settings for : Coop45 mod#3 | 2009-07-13 16:54:10 |
Posts: 1431
Merrill, Wisconsin , USA
|
No its not very loud at all, just has a nice bite to it.
|
----------------
2007 Can-Am 800 Outlander Max XT, HMF Penland Exhaust, 27" Zillas on Vision Outback Wheels
2007 Suzuki Kingquad 700 Sold
For Sale KingQuad Black Kimpex Flare Windshield
|
|
panteramatt
|
Subject: My clutch settings for : Coop45 mod#3 | 2009-07-17 07:11:49 |
Posts: 292
salem, New Jersey , USA
|
Missouri, youv already seen and heard the Yoshi on my bike.
|
----------------
2005 KQ 700, yfz450 shocks, epi clutch, coop mod #1,#2 and #3, Ported head, High compression piston,web cams, VDI, Injector, IAT relocated, Castor Mod,Yoshi exhaust, 27" bearclaws on ITP 212's.
|
|
TrailBuck650EX
|
Subject: My clutch settings for : Coop45 mod#3 | 2009-07-17 10:59:11 |
Posts: 3080
Perkiomenville, Pennsylvania , USA
|
Panteramatt,
I know I did, but they make two versions of the Yoshi for the Kingquad. I don't exactly know the names of them, but you and SGT have the good one for the KingQuad that Yoshi makes. I saw and heard one on a KingQuad where I ride locally, and it sounded like complete crap.  So I didn't know what version he had.
|
----------------
God Bless!
My Mod Page
2005 John Deere Trail-Buck 650EX
2007 KingQuad 700 Green
Failure will never overtake me if my determination to succeed is strong enough.
The Answers To All Of Your ATV Questions... Right HERE
|
|
panteramatt
|
Subject: My clutch settings for : Coop45 mod#3 | 2009-07-17 12:15:55 |
Posts: 292
salem, New Jersey , USA
|
Huh, didnt know that.
|
----------------
2005 KQ 700, yfz450 shocks, epi clutch, coop mod #1,#2 and #3, Ported head, High compression piston,web cams, VDI, Injector, IAT relocated, Castor Mod,Yoshi exhaust, 27" bearclaws on ITP 212's.
|
|
TrailBuck650EX
|
Subject: My clutch settings for : Coop45 mod#3 | 2009-07-17 12:27:10 |
Posts: 3080
Perkiomenville, Pennsylvania , USA
|
Yep! . Well, I just checked on Yoshi's site, and it only came up with the R-2 Stainless Pipe, but I remember my cousin telling me they made two kinds for the King.  . He was probably right, they might have discontinued it, becuase the Yoshi that I heard where I went riding on a King sounded HORRIBLE! Yours sounds really good! And if SGT has the same one as yours, I bet it does as well.
Here is the S-2 Stainless I found on Yoshi's site.
The Pipe
The Pipe On The Quad.
The King Quad 750AXi Rockstar/Yoshimura Edition
|
----------------
God Bless!
My Mod Page
2005 John Deere Trail-Buck 650EX
2007 KingQuad 700 Green
Failure will never overtake me if my determination to succeed is strong enough.
The Answers To All Of Your ATV Questions... Right HERE
|
|
panteramatt
|
Subject: My clutch settings for : Coop45 mod#3 | 2009-07-17 12:53:12 |
Posts: 292
salem, New Jersey , USA
|
Yea I have the tri-oval.
|
----------------
2005 KQ 700, yfz450 shocks, epi clutch, coop mod #1,#2 and #3, Ported head, High compression piston,web cams, VDI, Injector, IAT relocated, Castor Mod,Yoshi exhaust, 27" bearclaws on ITP 212's.
|
|
TrailBuck650EX
|
Subject: My clutch settings for : Coop45 mod#3 | 2009-07-17 13:02:30 |
Posts: 3080
Perkiomenville, Pennsylvania , USA
|
Yeah, It looks pretty cool. I just noticed that it is made in the USA.  . Its $350. I like it. I might get it for my KingQuad that I am going to build in the future. Don't know yet though. Either the HMF Penland that my dad has, or that one, that you have. I gotta stop copying your ideas though.  . Black plastics, no logos. I gotta change something, becuase I remember you saying you like being different. So I might just have Black Plastics or Brushed Black Plastics, with the Logo's, and stickers, with a HMF Penland. . Here is a picture of what my dream King would look like. Its not exact, but something similar that I photo shopped the wheels and tires in. But I am going to get those wheels and tires for mine. So this is an estimated picture of what it will look like...
This is on a 450. Thats the only black one I could find in that angle to shop the tires and wheels in.
Mine is going to be a 700
|
----------------
God Bless!
My Mod Page
2005 John Deere Trail-Buck 650EX
2007 KingQuad 700 Green
Failure will never overtake me if my determination to succeed is strong enough.
The Answers To All Of Your ATV Questions... Right HERE
|
|
panteramatt
|
Subject: My clutch settings for : Coop45 mod#3 | 2009-07-17 22:01:15 |
Posts: 292
salem, New Jersey , USA
|
If I were to get another exhaust it would be the BUB. They look awesome.
|
----------------
2005 KQ 700, yfz450 shocks, epi clutch, coop mod #1,#2 and #3, Ported head, High compression piston,web cams, VDI, Injector, IAT relocated, Castor Mod,Yoshi exhaust, 27" bearclaws on ITP 212's.
|
|
TrailBuck650EX
|
Subject: My clutch settings for : Coop45 mod#3 | 2009-07-17 22:06:28 |
Posts: 3080
Perkiomenville, Pennsylvania , USA
|
Really? MountainKing had the BUB Big bore, and it was really really quiet, and he said it wasn't giving him much power. He said his HMF Swamp Series XL really unleashed his King! 
|
----------------
God Bless!
My Mod Page
2005 John Deere Trail-Buck 650EX
2007 KingQuad 700 Green
Failure will never overtake me if my determination to succeed is strong enough.
The Answers To All Of Your ATV Questions... Right HERE
|
|
MountainKing
|
Subject: My clutch settings for : Coop45 mod#3 | 2009-07-17 22:34:15 |
Posts: 1962
Bear Creek Township, Pennsylvania , USA
|
not true the BUB offered more high end then low end, always get whole story GH...
also the picture is of a 450 not a 750...
-MK
|
----------------
2008 King Quad 750 AXI Brushed Black Special Edition
Tobyhanna Army Depot's POW/MIA Memorial, remembering all who served...
|
|
TrailBuck650EX
|
Subject: My clutch settings for : Coop45 mod#3 | 2009-07-17 22:36:37 |
Posts: 3080
Perkiomenville, Pennsylvania , USA
|
This you did not tell me. 
|
----------------
God Bless!
My Mod Page
2005 John Deere Trail-Buck 650EX
2007 KingQuad 700 Green
Failure will never overtake me if my determination to succeed is strong enough.
The Answers To All Of Your ATV Questions... Right HERE
|
|
MountainKing
|
Subject: My clutch settings for : Coop45 mod#3 | 2009-07-17 22:44:25 |
Posts: 1962
Bear Creek Township, Pennsylvania , USA
|
Didn't need to... 
-MK
|
----------------
2008 King Quad 750 AXI Brushed Black Special Edition
Tobyhanna Army Depot's POW/MIA Memorial, remembering all who served...
|
|
TrailBuck650EX
|
Subject: My clutch settings for : Coop45 mod#3 | 2009-07-17 22:45:40 |
Posts: 3080
Perkiomenville, Pennsylvania , USA
|
Well how am I supposed to get the whole story, but not need to know that??  
|
----------------
God Bless!
My Mod Page
2005 John Deere Trail-Buck 650EX
2007 KingQuad 700 Green
Failure will never overtake me if my determination to succeed is strong enough.
The Answers To All Of Your ATV Questions... Right HERE
|
|
